Proceedings of the All-Russian scientific and technical conference "Environmental and resource-saving technologies in science and technology" | Воронежский государственный лесотехнический университет имени Г.Ф. Морозова

Home / Conferences /Proceedings of the All-Russian scientific and technical conference "Environmental and resource-saving technologies in science and technology"

Conference title

Title

Proceedings of the All-Russian scientific and technical conference "Environmental and resource-saving technologies in science and technology"

ISBN

978-5-7994-0961-6 (online)

DOI

https://doi.org/10.34220/ERSTST2021

Status

ENERGY-RESOURCE-SAVING PLANT FOR WOOD PROCESSING INDUSTRY WASTE PROCESSING WITH THE PURPOSE OF OBTAINING BIOLOGICALLY ACTIVE SUBSTANCE – BETULIN

pp. 7–11

DOI: https://doi.org/10.34220/ERSTST2021_7-11

EVALUATION OF MULTI-OPERATING MACHINES PERFORMANCE DAMAGE TO THE FOREST AREA

pp. 12–17

DOI: https://doi.org/10.34220/ERSTST2021_12-17

RECIPE-TECHNOLOGICAL TECHNIQUES FOR INCREASING THE EFFICIENCY OF WOOD MATRIX MINERALIZATION

pp. 18–21

DOI: https://doi.org/10.34220/ERSTST2021_18-21

PROMISING TECHNOLOGIES FOR IMPROVING THE EFFICIENCY OF GROUP ACCOUNTING OF ROUND TIMBER

pp. 22–26

DOI: https://doi.org/10.34220/ERSTST2021_22-26

SUBSTANTIATION AND DEVELOPMENT OF THE MODE OF MANUFACTURE OF WOOD NEUTRON-PROTECTIVE MATERIAL

pp. 27–31

DOI: https://doi.org/10.34220/ERSTST2021_27-31

RESEARCH OF COMPOSITE MATERIALS OF WOOD WASTE BASING ON DIFFERENT MODIFIERS

pp. 32–36

DOI: https://doi.org/10.34220/ERSTST2021_32-36

INFORMATION SYSTEM SOFTWARE FOR THE SELECTION OF FOREST MACHINERY

pp. 37–42

DOI: https://doi.org/10.34220/ERSTST2021_37-42

SOFT WOODS – RAW MATERIALS FOR INNOVATIVE PRODUCTION OF CONSTRUCTION MATERIAL

pp. 43–47

DOI: https://doi.org/10.34220/ERSTST2021_43-47

CURRENT STATE AND OPPORTUNITIES FOR THE DEVELOPMENT OF COOPERATION BETWEEN THE RUSSIA AND THE PRC IN THE FIELD OF THE FORESTRY COMPLEX

pp. 48–53

DOI: https://doi.org/10.34220/ERSTST2021_48-53

ENERGY-RESOURCE-SAVING TECHNOLOGIES FOR THE CONSTRUCTION OF FOREST ROADS

pp. 54–59

DOI: https://doi.org/10.34220/ERSTST2021_54-59

OVERVIEW OF WAYS TO IMPROVE THE QUALITY OF GLUED WOOD MATERIALS

pp. 60–66

DOI: https://doi.org/10.34220/ERSTST2021_60-66

SMALL RIVERS ENERGY APPLICATION FOR WASTE WOOD PROCESSING AT FELLING AREA

pp. 67–72

DOI: https://doi.org/10.34220/ERSTST2021_67-72

SOFTWARE COMPLEX FOR MODERN DOMESTIC SOLUTIONS FOR TRANSPORT DEVELOPMENT OF HARD-TO-REACH CUTTING AREAS

pp. 73–75

DOI: https://doi.org/10.34220/ERSTST2021_73-77

SEPARATION OF PYROLYSIS GASES

pp. 78–81

DOI: https://doi.org/10.34220/ERSTST2021_78-81

DEVELOPMENT OF INNOVATIVE TECHNOLOGIES FOR PROCESSING LOGGING WASTE IN LOGGING CONDITIONS

pp. 82–86

DOI: https://doi.org/10.34220/ERSTST2021_82-86

INVESTIGATION OF THE INFLUENCE OF NATURAL AND CLIMATIC CONDITIONS ON THE OPERATION OF MOBILE WOOD PROCESSING EQUIPMENT

pp. 87–92

DOI: https://doi.org/10.34220/ERSTST2021_87-92

TECHNICAL SOLUTION FOR SUPPRESSING STUPS DURING SOIL PREPARATION FOR LANDING AFTER CUTTING

pp. 93–96

DOI: https://doi.org/10.34220/ERSTST2021_93-96

TO THE QUESTION OF JUSTIFICATION OF THE EFFICIENCY OF MODERNIZATION OF WORKING PROCESSES AND FUNCTIONAL UNITS OF MECHANISMS

pp. 97–101

DOI: https://doi.org/10.34220/ERSTST2021_97-101

MATHEMATICAL MODELING OF WOOD COMPOSITE MATERIAL IN WOODWORKING INDUSTRY

pp. 102–106

DOI: https://doi.org/10.34220/ERSTST2021_102-106

ABOUT COEFFICIENT OF COMPLIANCE, ERROR AND BEARING CAPACITY OF COMPOSITE WOOD ELEMENTS

pp. 107–111

DOI: https://doi.org/10.34220/ERSTST2021_107-111

ENERGY-RESOURCE-SAVING TECHNOLOGIES OF POWER SUPPLY OF FOREST TERMINALS

pp. 112–117

DOI: https://doi.org/10.34220/ERSTST2021_112-117

RECYCLING OF WASTE FROM CHIPBOARD

pp. 118–123

DOI: https://doi.org/10.34220/ERSTST2021_118-123

METHOD FOR PREPARING FILLER FROM FRESH CUTTED DECIDUAL SPECIES FOR PRODUCING ARBOLITE

pp. 124–128

DOI: https://doi.org/10.34220/ERSTST2021_124-128

MODIFICATION OF ADHESIVES BY PROCESSING WITH A WAVE FIELD IN ORDER TO INCREASE THE STRENGTH OF WOODEN STRUCTURES

pp. 129–132

DOI: https://doi.org/10.34220/ERSTST2021_129-132

DETERMINATION OF THE RATIONAL COMPOSITION OF WOOD-COMPOSITES BASED ON PVA IN THE PRODUCTION OF PLATE COMPOSITES

pp. 133–138

DOI: https://doi.org/10.34220/ERSTST2021_133-138

ECHNOLOGICAL ASPECTS OF THE USE OF WOOD CHIPS FOR THE PRODUCTION OF ELECTRICITY AND HEAT

pp. 139–144

DOI: https://doi.org/10.34220/ERSTST2021_139-144

ABOUT THE PREPARATION FOR THE WORK OF BAND AND FRAME SAWS

pp. 145–149

DOI: https://doi.org/10.34220/ERSTST2021_145-149

PROSPECTS FOR THE PRODUCTION OF STRUCTURAL MATERIAL BASED ON LOW-VALUE WOOD AND POLYETHYLENE TEREPHTHALATE WASTE FOR LOW-RISE HOUSING CONSTRUCTION

pp. 150–154

DOI: https://doi.org/10.34220/ERSTST2021_150-154

THE PROSPECT OF APPLICATION FOR THE PROTECTIVE TREATMENT OF WASTE WOOD STYRENE-BUTADIENE RUBBERS

pp. 155–158

DOI: https://doi.org/10.34220/ERSTST2021_155-158

TECHNICAL SOLUTION FOR LAYING FIRE-FIGHTING MINERALIZED STRIPS AND EXTINGUISHING LOW FOREST FIRES

pp. 164–168

DOI: https://doi.org/10.34220/ERSTST2021_164-168

MULTI-FACTOR OPTIMIZATION OF CONSTRUCTIVE PARAMETERS OF RECUPERATIVE MECHANISMS OF FOREST TRUCK TRAIN

pp. 169–173

DOI: https://doi.org/10.34220/ERSTST2021_169-173

COMBINED METHOD OF DRYING-SEPARATION OF WOOD PARTICLES IN PRODUCTION OF PARTICLE BOARDS

pp. 174–178

DOI: https://doi.org/10.34220/ERSTST2021_174-178

INSTALLATION OF MINE PYROLYSIS FOR PROCESSING ORGANIC WASTE

pp. 179–180

DOI: https://doi.org/10.34220/ERSTST2021_179-181

STUDY OF THE DESTRUCTION PROCESS OF BIODEGRADABLE WOOD-FILLED PLA-BASED COMPOSITES

pp. 182–187

DOI: https://doi.org/10.34220/ERSTST2021_182-187

INVESTIGATION OF THE HARDNESS OF PINE WOOD DAMAGED BY A STRONG GRASSROOTS AND RIDING FIRE

pp. 188–191

DOI: https://doi.org/10.34220/ERSTST2021_188-191

ENERGY-SAVING TECHNOLOGY FOR PROCESSING WOOD WASTE

pp. 192–196

DOI: https://doi.org/10.34220/ERSTST2021_192-196

WOOD-POLYMER COMPOSITE MATERIAL

pp. 197–201

DOI: https://doi.org/10.34220/ERSTST2021_197-201

MECHANICAL PROPERTY DEPENDENCY STUDY EPOXY COMPOSITES FROM STRUCTURE-FORMING FACTORS

pp. 202–206

DOI: https://doi.org/10.34220/ERSTST2021_202-206

THE USE OF THERMAL INSULATION MATERIALS FROM LIGNOCELLULOSE INDUSTRIAL WASTE IN SOLVING THE PROBLEM OF MAINTAINING THE CARBON BALANCE

pp. 207–212

DOI: https://doi.org/10.34220/ERSTST2021_207-212

ACTIVATION OF CARBON IN AN ENEGRY-SAVING WAY

pp. 213–217

DOI: https://doi.org/10.34220/ERSTST2021_213-217

INNOVATIVE TECHNOLOGICAL SOLUTION FOR THE PRODUCTION OF SLEEPERS FROM MODIFIED WOOD

pp. 218–222

DOI: https://doi.org/10.34220/ERSTST2021_218-222

RESULTS OF REGRESSION PROCESSING OF THE EXPERIMENTAL OF THE DATA AND THEIR COMPARISON WITH THE RESULTS OBTAINED BY ANALYTICAL MODELS

pp. 223–228

DOI: https://doi.org/10.34220/ERSTST2021_223-228

Date of formation

09.02.2022

Published

15.02.2022

Date of issue testifies to the registration of the periodics

14.02.2022

Quantity of pages

229

The collection presents the materials of the All-Russian scientific and technical conference "Environmental and resource-saving technologies in science and technology", held in Voronezh on October 19-20, 2021. The materials are intended for forest industry specialists and a wide range of readers.

resource-saving technologies

Code 574
Name Общая экология. Биоценология. Гидробиология. Биогеография

Confirmation