WHAT DO THE MISTAKES OF DESIGNERS LEAD TO?
Section: GENERAL SECTION
Authors:
1.
Voronezh State University of Forestry and Technologies named after G.F. Morozov
Russian Federation
Russian Federation
2.
Voronezh State University of Forestry and Technologies named after G.F. Morozov
(Department of Industrial Transport, Civil Engineering and Geodesy, Professor)
employee
Voronezh, Voronezh, Russian Federation
employee
Voronezh, Voronezh, Russian Federation
Type:
Сonference article
Published:
24.10.2024
Subject area:
UDK 678 Промышленность высокомолекулярных веществ. Резиновая промышленность. Промышленность пластмасс
Language:
Russian
Keywords:
design, choice of materials, efficiency, technology
Abstract (English):
In this article we will look at what mistakes can be made when choosing materials, ergonomics, functionality and design. However, it is important to consider science and functionality when designing. This topic is not well understood and many factors may influence its development. Projects will be more effective if advanced technologies and materials are used when introducing modern technologies. Design is the solution of high-level problems to improve the development or creation of a specific technical system. At the same time, projects can be as efficient as possible by using the most modern equipment, technology and cutting-edge scientific knowledge. At the same time, projects must be realistic.
In this article we will look at what mistakes can be made when choosing materials, ergonomics, functionality and design. However, it is important to consider science and functionality when designing. This topic is not well understood and many factors may influence its development. Projects will be more effective if advanced technologies and materials are used when introducing modern technologies. Design is the solution of high-level problems to improve the development or creation of a specific technical system. At the same time, projects can be as efficient as possible by using the most modern equipment, technology and cutting-edge scientific knowledge. At the same time, projects must be realistic.
Keywords:
design, choice of materials, efficiency, technology
design, choice of materials, efficiency, technology
1. Bunakov P.Yu., Starikov A.V. Avtomatizaciya proektirovaniya korpusnoy mebeli: osnovy, instrumenty, praktika. – Moskva, DMK Press, 2009. – 852 s.
2. Bartashevich, A. A., Trofimov S. P. Konstruirovanie mebeli. - Minsk, 2006. – 368 s.
3. Grigor'ev M. A. Materialovedenie dlya stolyarov i plotnikov. – Moskva : Vysshaya shkola, 1985. - 161 s.
4. Belov A.A., Yanov V.V. Hudozhestvennoe konstruirovanie mebeli. – Moskva : Lesnaya promyshlennost', 1974. – 224 s.
