THE EFFECT OF THE SPECIES COMPOSITION OF WOOD ON THE SWELLING OF FIBERBOARD
Section: GENERAL SECTION
Authors:
1.
Voronezh State University of Forestry and Technologies named after G.F. Morozov
Russian Federation
Russian Federation
2.
Voronezh State University of Forestry and Technologies named after G.F. Morozov
(kafedra drevesinovedeniya, zaveduyuschiy kafedroy)
Voronezh, Voronezh, Russian Federation
Voronezh, Voronezh, Russian Federation
Type:
Сonference article
Published:
28.12.2024
Subject area:
UDK 674.817-41 Древесноволокнистые плиты
Language:
Russian
Keywords:
dry process fibreboard, wood mix, thickness swelling
Abstract (English):
The influence of the woodspeciescomposition oft he chipsontheswelling of the finishedboard is considered. Production testing is carried out aimed at reducing the cost of production by changing the wood species composition. The characteristics of boards made from different wood raw materials are compared. The minimum permissible dosage of the adhesive mixture is established when using different wood species. The feasibility of using coniferous wood in this production is assessed.
The influence of the woodspeciescomposition oft he chipsontheswelling of the finishedboard is considered. Production testing is carried out aimed at reducing the cost of production by changing the wood species composition. The characteristics of boards made from different wood raw materials are compared. The minimum permissible dosage of the adhesive mixture is established when using different wood species. The feasibility of using coniferous wood in this production is assessed.
Keywords:
dry process fibreboard, wood mix, thickness swelling
dry process fibreboard, wood mix, thickness swelling
1. Mersov E.D. Proizvodstvo drevesnovoloknistyh plit. – M. : Vysshaya shkola, 1989. – 232 s.
