THE EFFECT OF THE TYPE OF GLUE ON THE DURATION OF EXPOSURE OF OAK BOARDS DURING THE BONDING PROCESS
Section: GENERAL SECTION
Authors:
1.
Voronezh State University of Forestry and Technologies named after G.F. Morozov
Russian Federation
Russian Federation
2.
Voronezh State University of Forestry and Technologies named after G.F. Morozov
(kafedra drevesinovedeniya, zaveduyuschiy kafedroy)
Voronezh, Voronezh, Russian Federation
Voronezh, Voronezh, Russian Federation
3.
Voronezh State University of Forestry and Technologies named after G.F. Morozov
(kafedra drevesinovedeniya, docent)
Voronezh, Voronezh, Russian Federation
Voronezh, Voronezh, Russian Federation
Type:
Сonference article
Published:
18.06.2025
Subject area:
674.028.9
Language:
Russian
Keywords:
oak wood, gluing of wood, duration of exposure of glued parts, swelling of wood
Abstract (English):
The article deals with the influence of glue type on the process of gluing oak wood parts. The rational time of restoration of initial dimensions of glued parts in the zone of glue joint is established. The rational time of holding time of glued parts before different types of mechanical processing is recommended. The use of modern adhesives allows to reduce more than 2 times the holding time of glued parts before machining in comparison with the existing norms.
The article deals with the influence of glue type on the process of gluing oak wood parts. The rational time of restoration of initial dimensions of glued parts in the zone of glue joint is established. The rational time of holding time of glued parts before different types of mechanical processing is recommended. The use of modern adhesives allows to reduce more than 2 times the holding time of glued parts before machining in comparison with the existing norms.
Keywords:
oak wood, gluing of wood, duration of exposure of glued parts, swelling of wood
oak wood, gluing of wood, duration of exposure of glued parts, swelling of wood
1. Spravochnik mebel'schika. Pod redakciey V.P. Buhtiyarova. Konstrukcii i funkcional'nye razmery. Materialy. Tehnologiya proizvodstva / V.E. Kuznecov, B.I. Artamonov, V.F. Savchenko, V.N. Rozov. – 2-e izd., pererab. – Lesn. prom-st'. 1985. – 360 s.
2. Putilin I.N. Vliyanie kachestva podgotovki poverhnosti drevesiny na prodolzhitel'nost' processa ee splachivaniya / I.N. Putilin, A. D. Platonov, S. T. Shaltabaeva // Energoresursosberegayuschie i ekologicheski bezopasnye tehnologii lesopromyshlennogo kompleksa : Materialy Mezhdunarodnoy nauchnoy konferencii uchenyh i studentov. Voronezh, 26 sentyabrya 2024 goda. - Voronezh, 2024. - S. 169-172. DOI: https://doi.org/10.58168/E-SEFTFI2024_169-172; EDN: https://elibrary.ru/TSAKJF
