TECHNICAL AND ALGORITHMIC SUPPORT OF AUTOMATED CONTROL SYSTEMS FOR CONTINUOUS WEIGHT DOSING OF BULK MATERIALS

Polyakov Sergey Ivanovich

doi:doi:10.58168/E-SESTTI2025_116-120

Home / Conferences / ENERGY-SAVING AND ENVIRONMENTALLY SAFE TECHNOLOGIES OF THE TIMBER INDUSTRY – 2025 / Materials of the international scientific conference dedicated to the 95th anniversary of the VGLTU named after G.F. Morozov and the 80th anniversary of Victory in the Great Patriotic War : «ENERGY-SAVING AND ENVIRONMENTALLY SAFE TECHNOLOGIES OF THE TIMBER INDUSTRY – 2025»

TECHNICAL AND ALGORITHMIC SUPPORT OF AUTOMATED CONTROL SYSTEMS FOR CONTINUOUS WEIGHT DOSING OF BULK MATERIALS

Submit manuscript

To cite

TECHNICAL AND ALGORITHMIC SUPPORT OF AUTOMATED CONTROL SYSTEMS FOR CONTINUOUS WEIGHT DOSING OF BULK MATERIALS

Section: GENERAL SECTION

Proceedings: MATERIALS OF THE INTERNATIONAL SCIENTIFIC CONFERENCE DEDICATED TO THE 95TH ANNIVERSARY OF THE VGLTU NAMED AFTER G.F. MOROZOV AND THE 80TH ANNIVERSARY OF VICTORY IN THE GREAT PATRIOTIC WAR : «ENERGY-SAVING AND ENVIRONMENTALLY SAFE TECHNOLOGIES OF THE TIMBER INDUSTRY – 2025»

UDK 517.98 Функциональный анализ и теория операторов

Polyakov Sergey Ivanovich ¹

Author and publication information

Authors:

1. Voronezh State University of Forestry and Technologies named after G.F. Morozov

Type:

Сonference article

DOI:

https://doi.org/10.58168/E-SESTTI2025_116-120

Published:

18.06.2025

Subject area:

517.98

Language:

Russian

Keywords:

Algorithmic support, technical support, automated control system, continuous weight dosing

Abstract and keywords

Abstract (English):
The article is devoted to the problem of automation of weight measurement by a continuous method of bulk materials. Algorithmic and technical support of an automated control system for continuous dosing of bulk materials in various industries creates the prerequisites for effective control of the dosing process. A typical algorithm for calculating numerical values of dose weight is given. The strain gauge weight converter allows you to measure the specific gravity of the material on the tape of the weighing dispenser with high accuracy. The design features of the Newton-11M device and its configuration parameters are considered.

Keywords:
Algorithmic support, technical support, automated control system, continuous weight dosing

References

1. Sistemy izmeritel'nye STMM. Metodika poverki», utverzhdennaya rukovoditelem GCI SI FGUP «CAGI» 18.12.2015 goda.

2. Rachkov M.Yu. Tehnicheskie izmereniya i pribory / M. Yu. Rachkov. - Izd. 2-e, pererab. i dop. - M.: MGIU, 2007. - 200 s. EDN: https://elibrary.ru/QMFKQF

3. Rannev G.G. Metody i sredstva izmereniy: / G. G. Rachkov, A.P. Tarasenko. - Izd. 2-e, stereotipnoe. - M.: Izdatel'skiy centr «Akademiya», 2004. - 336 s.

4. Shishmarev V.Yu. Sredstva izmereniy / V. Yu. Shishmarev. - M.: Izdatel'skiy centr «Akademiya», 2006. - 320 s. EDN: https://elibrary.ru/QNDKIT

5. Polyakov S.I., Uhin A.S., Chelyshev S.G. Tehnicheskoe obespechenie dozirovaniya komponentov betonnyh smesey s tenzometricheskoy vesoizmeritel'noy sistemoy // Internet-resurs: XXXI-aya mezhdunarodnaya nauchno-tehnicheskaya internet-konferenciya «Novye materialy i tehnologii v mashinostroenii», 10 maya - 10 iyunya / Bryansk: BGITU, 2020. http://science-bsea.bgita.ru.

6. Polyakov, S.I., V. I. Akimov V.I., Polukazakov A.V. Mathematical model of the dynamics of the balancing mechanism of the weighing system of the dispenser // Journal "Proceedings of the 8th International Conference on Industrial Engineering" ICIE 2022 publishing house Springer International Publishing AG / Switzerland, 2022. – pp. 370-380. DOI: https://doi.org/10.1007/978-3-031-14125-6_37

Submit manuscript

To cite

Citations:

Confirmation

Регистрация