Abstract and keywords
Abstract (English):
The paper investigates the capabilities of the internal friction method for detecting and determining internal stresses in wood based on the analysis of the logarithmic damping decrement δ of bending vibrations. The experiment was conducted on a free bending vibration test setup using samples of natural and bog oak in the radial and tangential directions. It was found that an increase in internal stresses leads to a corresponding increase in δ by 6–9%, with the highest values found for the tangential direction of bog oak. The results confirm the sensitivity of the internal friction method to microdefects and anisotropy of wood, which is consistent with the mechanisms of internal energy dissipation at the level of wood fibers. This method may be promising for non-destructive testing of stresses in building and loaded wooden structures.

Keywords:
internal stresses, wood, shrinkage, anisotropy, mechanical properties, moisture, temperature gradients, wood drying, deformations
References

1. Ugolev, B.N. Kontrol' napryazheniy pri sushke drevesiny / B.N. Ugolev, Yu.G. Lapshin, E.V. Krotov. – Moskva: Lesnaya promyshlennost', 1980. – 205 s.

2. Yin, Q. Drying Stress and Strain of Wood: A Review / Q. Yin, H-H. Liu // Applied Sciences. – 2021. – Vol. 11, No. 11. – P. 5023. – doi: https://doi.org/10.3390/app11115023.

3. Evaluation of the drying stress in industrial kiln-dried boards using a force-based technique / S. Leelatanon, S. Jantawee, S. Vannarat, N. Matan // BioResources. – 2019. – Vol. 14, No. 2. – P. 4403-4412. – doi:https://doi.org/10.15376/biores.14.2.4403-4412/

4. Postnikov, V.S. Vnutrennee trenie v metallah / V.S. Postnikov. – 2-e izd., pererab. i dop. – Moskva: Metallurgiya, 1974. – 351 s.

5. Effektivnaya mikrovolnovaya sushka duba / A.V. Russu, V.A. Shamaev, I.N. Medvedev, N.A. Trubnikov. – Voronezhskiy gosudarstvennyy lesotehnicheskiy universitet im. G.F. Morozova, 2022. – C. 256-268.

Login or Create
* Forgot password?