Minsk, Belarus
Russian Federation
Russian Federation
To determine the influence of natural production factors on the required capacity when performing technological operations related to capturing and felling trees, as well as pruning branches and bucking whips of various breeds for sorting, the article presents the developed methodology for calculating and selecting the main parameters of the harvester head, based on consideration of the features of performing technological operations by individual nodes of this technological equipment.
research, harvester head, force, power, pulling, sawing, felling
1. Sen'kin V.A. Obosnovanie parametrov oborudovaniya mnogooperacionnyh mashin pri sortimentnoy zagotovke drevesiny: avtoreferat dissertacii kandidata tehnicheskih nauk: 05.21.01; Sankt-Peterburgskiy gosudarstvennyy lesotehnicheskiy universitet im. S.M.Kirova. – SPb., 2006. 20 s.
2. Zimelis A., Sisenis L., Sarmulis Z., Ariko S. Technology and energy balance in stump harvesting with MCR 500 // Engineering for rural development: 17th International Scientific Conference, Jelgava, 23–25 May 2018 / Latvia University of Life Sciences and Technologies Faculty of Engineering, Latvian Academy of Agricultural and Forestry Scieces. – Jelgava, Latvia, 2018. pp. 1395–1400. DOI:https://doi.org/10.22616/ERDev2018.17.N162.
3. Ariko S.E. Obosnovanie parametrov valochno-suchkorezno-raskryazhevochnoy mashiny dlya rubok promezhutochnogo lesopol'zovaniya: avtoreferat dissertacii kandidata tehnicheskih nauk: 05.21.01; Belorusskiy gosudarstvennyy tehnologicheskiy universitet. – Minsk, 2012. – 157 s.
4. Kushlyaev V.F. Lesozagotovitel'nye mashiny manipulyatornogo tipa. – M.: Lesnaya promyshlennost', 1981. – 248 s.
5. Matveyko A.P. Tehnologiya i oborudovanie lesozagotovitel'nogo proizvodstva: uchebnik. – Minsk: Tehnoperspektiva, 2006. – 447 s.
6. Fedorenchik A.S., Turlay I.V. Harvestery: ucheb. posobie dlya studentov vuzov. – Minsk: BGTU, 2002. – 172 s.
7. Davidans M., Savel'ev A., Sarmulis Z., Reboks D., Ariko S.E. Obrabotka netipichnyh derev'ev harvesterom // Lesozagotovitel'noe proizvodstvo: problemy i resheniya: materialy mezhdunarodnoy nauchno-tehnicheskoy konferencii, Minsk, 26–28 aprelya 2017. – Minsk: BGTU, 2017. – S. 132-134.
8. Golyakevich S.A., Ariko S.E., Goronovskiy A.R., Mohov S.P., Pischov S.N. Modelirovanie raboty tehnologicheskogo oborudovaniya harvestera na operacii obrezki such'ev // Aktual'nye napravleniya nauchnyh issledovaniy XXI veka: teoriya i praktika: materialy Mezhdunar. zaochnoy nauch.-tehn. konf., Voronezh, 17–19 marta 2015 g. / Federativnoe gos. byudzh. obrazovatel'noe uchrezhd. vyssh. prof. obrazovaniya «Voronezh. gos. lesotehn. akad.»; redkol.: V.M. Bugakov (gl. red.) [i dr.]. – Voronezh, 2015. – №2 ch. 1 (13–1). – S. 195-199.
