VALUE OF THERMOMECHANICAL PROPERTIES OF AMORPHOUS POLYVINYL CHLORIDE FOR MOLDING TEMPERATURES OF WOOD-POLYMER COMPOSITE
Authors:
1.
Moscow State Forest University
(kafedra tehnologii mashinostroeniya, aspirant)
Mytischi, Moscow, Russian Federation
Mytischi, Moscow, Russian Federation
2.
Moscow State Forest University
(Department of Electrical Engineering, Heat Engineering and Power Enterprises of Timber Industry, Associate Professor)
Mytischi, Moscow, Russian Federation
Mytischi, Moscow, Russian Federation
Type:
Сonference article
Pages:
from 15
to 18
Published:
02.12.2025
Subject area:
UDC 620.179.1
Language:
Russian
Keywords:
dynamic thermomechanical analysis (DTMA), coefficient of linear thermal expansion (CTLE), wood-polymer composite (WPC), polyvinylchloride (PVC), tangent of the angle of mechanical loss (tan δ).
Abstract (English):
The study analyzes the thermal properties of amorphous polymer composite. The thermal stability and mechanical characteristics of wood-polymer composite based on polyvinyl chloride at different temperatures were studied. The results show the importance of taking into account the thermomechanical properties of WPC in the development and optimization of molding technologies for products made of this material.
The study analyzes the thermal properties of amorphous polymer composite. The thermal stability and mechanical characteristics of wood-polymer composite based on polyvinyl chloride at different temperatures were studied. The results show the importance of taking into account the thermomechanical properties of WPC in the development and optimization of molding technologies for products made of this material.
Keywords:
dynamic thermomechanical analysis (DTMA), coefficient of linear thermal expansion (CTLE), wood-polymer composite (WPC), polyvinylchloride (PVC), tangent of the angle of mechanical loss (tan δ).
dynamic thermomechanical analysis (DTMA), coefficient of linear thermal expansion (CTLE), wood-polymer composite (WPC), polyvinylchloride (PVC), tangent of the angle of mechanical loss (tan δ).
1. Friedrich D. Thermoplastic moulding of wood-polymer composites (WPC): A review and research proposal on thermo-physical and geometric design options using hot-pressing / D. Friedrich // European Journal of Wood and Wood Products. – 2022. – Vol. 80, № 1. – rr. 7-21.
2. Blaznov A.N. Analiz metodov termomehanicheskih ispytaniy kompozitnyh materialov i sravnenie rezul'tatov / A.N. Blaznov, E.V. Atyasova, V.V. Samoylenko // Yuzhno-Sibirskiy nauchnyy vestnik. – 2017. – № 1(17). – S. 54-69.
3. Ganieva E.N. Kinetika termicheskogo razlozheniya drevesno-polimernyh kompozitov / E.N. Ganieva, M.G. Ermochenkov, M.Yu. Kladov // Sistemy. Metody. Tehnologii. – 2025. – № 2(66). – S. 143-149. – DOIhttps://doi.org/10.18324/2077-5415-2025-2-143-149.
