INFLUENCE OF POLYETHYLENE MATRIX TYPE ON THERMOMECHANICAL CHARACTERISTICS AND OPTIMAL MOLDING TEMPERATURES OF WOOD COMPOSITES
Authors:
1.
Moscow State Forest University
(kafedra tehnologii mashinostroeniya, aspirant)
Mytischi, Moscow, Russian Federation
Mytischi, Moscow, Russian Federation
2.
Moscow State Forest University
(Department of Electrical Engineering, Heat Engineering and Power Enterprises of Timber Industry, Associate Professor)
Mytischi, Moscow, Russian Federation
Mytischi, Moscow, Russian Federation
Type:
Сonference article
Pages:
from 161
to 165
Published:
02.12.2025
Subject area:
UDC 620.179.1
Language:
Russian
Keywords:
dynamic thermomechanical analysis (DTMA), coefficient of linear thermal expansion (CTLE), wood-polymer composite (WPC), low-density polyethylene (LDPE), and high-density polyethylene (HDPE)
Abstract (English):
The paper analyzes the thermal stability and mechanical properties of wood-polymer composites based on polyethylene at different temperatures. The obtained data indicate the need to take into account the thermomechanical parameters of WPC in the development and improvement of molding technologies for products made of these materials.
The paper analyzes the thermal stability and mechanical properties of wood-polymer composites based on polyethylene at different temperatures. The obtained data indicate the need to take into account the thermomechanical parameters of WPC in the development and improvement of molding technologies for products made of these materials.
Keywords:
dynamic thermomechanical analysis (DTMA), coefficient of linear thermal expansion (CTLE), wood-polymer composite (WPC), low-density polyethylene (LDPE), and high-density polyethylene (HDPE)
dynamic thermomechanical analysis (DTMA), coefficient of linear thermal expansion (CTLE), wood-polymer composite (WPC), low-density polyethylene (LDPE), and high-density polyethylene (HDPE)
1. Friedrich D. Thermoplastic moulding of wood-polymer composites (WPC): A review and research proposal on thermo-physical and geometric design options using hot-pressing / D. Friedrich // European Journal of Wood and Wood Products. – 2022. – Vol. 80, № 1. – rr. 7–21.
2. Blaznov A.N. Analiz metodov termomehanicheskih ispytaniy kompozitnyh materialov i sravnenie rezul'tatov / A.N. Blaznov, E.V. Atyasova, V.V. Samoylenko // Yuzhno-Sibirskiy nauchnyy vestnik. – 2017. – № 1(17). – S. 54-69.
3. Ganieva E.N. Kinetika termicheskogo razlozheniya drevesno-polimernyh kompozitov / E.N. Ganieva, M.G. Ermochenkov, M.Yu. Kladov // Sistemy. Metody. Tehnologii. – 2025. – № 2(66). – S. 143-149. – DOIhttps://doi.org/10.18324/2077-5415-2025-2-143-149.
