Russian Federation
The article presents a comprehensive analysis of modern alternative technologies for the manufacture and restoration of automotive parts. Additive methods are considered, including selective laser fusion and direct laser growth, cold spraying, laser surfacing, thermal spraying and composite repairs. Special attention is paid to the comparative characteristics of technologies, economic efficiency and practical aspects of implementation in car service stations and manufacturing enterprises. The article is based on current research and practical experience in the implementation of advanced recovery methods in the automotive industry.
additive technologies, restoration of parts, cold spraying, laser deposition, WAAM, composite materials, automotive components, non-destructive testing
1. Kabakova, N. A. Perspektivy primeneniya novyh tehnologiy na primere additivnyh tehnologiy v sel'skohozyaystvennom mashinostroenii / N. A. Kabakova, P. N. Kuznecov // Nauka i Obrazovanie. – 2024. – T. 7, № 3. – EDN JTLGXY.
2. Saraev, Yu. N. Analiz napravleniy sovershenstvovaniya tehnologicheskih processov svarki i naplavki na osnove metodov upravlyaemogo vysokoenergeticheskogo vozdeystviya na harakteristiki teplomassoperenosa pri impul'sno-dugovyh tehnologiyah svarki i naplavki / Yu. N. Saraev // Evraziyskoe Nauchnoe Ob'edinenie. – 2017. – T. 1, № 11(33). – S. 47-50. – EDN ZWEASP. Krovopuskov, E. A. K voprosu ob additivnyh tehnologiyah v mashinostroenii / E. A. Krovopuskov, P. A. Krovopuskov // Problemy i perspektivy razvitiya sovremennogo mashinostroeniya : Sbornik statey mezhdunarodnoy nauchnoy konferencii, Lipeck, 30 maya 2023 goda. – Lipeck: Lipeckiy gosudarstvennyy tehnicheskiy universitet, 2024. – S. 46-51. – EDN CQPMOH.
3. Besedina, K. S. Primenenie additivnyh tehnologiy polimerov v mashinostroenii / K. S. Besedina, N. A. Lavrov, V. V. Barskov // Innovacionnye materialy i tehnologii v dizayne : Tezisy dokladov IV Vserossiyskoy nauchno-prakticheskoy konferencii s uchastiem molodyh uchenyh, Sankt-Peterburg, 22–23 marta 2018 goda. – Sankt-Peterburg: Sankt-Peterburgskiy gosudarstvennyy institut kino i televideniya, 2018. – S. 26-27. – EDN YWKBFY.
4. Yakovenko, I. S. Optimizaciya processa holodnogo napyleniya metallov dlya additivnyh tehnologiy / I. S. Yakovenko, A. L. Kotel'nikov, A. D. Kiverin // Vestnik Ob'edinennogo instituta vysokih temperatur. – 2022. – T. 8, № 2. – S. 22-27. – DOIhttps://doi.org/10.33849/2022205. – EDN ZRKFHY.
5. Perevertov, V. P. Klassifikacii nanomaterialov dlya tradicionnyh i additivnyh tehnologiy v sisteme transportnogo mashinostroeniya / V. P. Perevertov, N. A. Kuzin, N. K. Yurkov // Nadezhnost' i kachestvo slozhnyh sistem. – 2022. – № 2(38). – S. 70-77. – DOIhttps://doi.org/10.21685/2307-4205-2022-2-8. – EDN MYCRPF.
