SIMULATION OF THERMAL PROCESSES DURING PLASMA COATING APPLICATION USING DIRECT AND INDIRECT ARC

A. Kadyrmetov; Vladimir Buhtoyarov; V Ivannikov; A. Golev

doi:doi:10.58168/IndTPEng2026_77-83

Home / Conferences / INDUSTRIAL THERMAL POWER ENGINEERING / INDUSTRIAL THERMAL POWER ENGINEERING : Materials of the National Scientific and Practical Conference, Voronezh, March 18, 2026

SIMULATION OF THERMAL PROCESSES DURING PLASMA COATING APPLICATION USING DIRECT AND INDIRECT ARC

Submit manuscript

To cite

SIMULATION OF THERMAL PROCESSES DURING PLASMA COATING APPLICATION USING DIRECT AND INDIRECT ARC

Section: GENERAL SECTION

Proceedings: INDUSTRIAL THERMAL POWER ENGINEERING : MATERIALS OF THE NATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE, VORONEZH, MARCH 18, 2026

UDC 621.793

A. Kadyrmetov ¹

Vladimir Buhtoyarov ²

V Ivannikov ³

A. Golev ⁴

Author and publication information

Authors:

1. Voronezh State University of Forestry and Technologies named after G.F. Morozov
Voronezh, Voronezh, Russian Federation

2. Voronezh State University of Forestry and Technologies named after G.F. Morozov

3. Voronezhskiy gosudarstvennyy lesotehnicheskiy universitet imeni G.F. Morozova
Russian Federation

4. Voronezh State University of Forestry and Technologies named after G.F. Morozov
Russian Federation

Type:

Сonference article

DOI:

https://doi.org/10.58168/IndTPEng2026_77-83

Pages:

from 77 to 83

Published:

25.05.2026

Subject area:

UDC 621.793

Language:

Russian

Keywords:

temperature field of the part, plasma treatment, melting of the coating, physical and mechanical properties of the part and coating

Abstract and keywords

Abstract:
The condition of a plasma coating depends on the correct selection of process conditions. These, in turn, determine the temperature field generated in the part and coating. The condition of a coating or part can be predicted by modeling the temperature conditions of the plasma treatment process. This article examines the mathematical modeling of thermal processes in which both an indirect and direct arc act as a heat source. The influence of process conditions on the temperature parameters of the plasma treatment process is analyzed as they change.

Keywords:
temperature field of the part, plasma treatment, melting of the coating, physical and mechanical properties of the part and coating

References

1. Kadyrmetov, A. M. Teoreticheskie osnovy i tehnologicheskoe obespechenie kachestva plazmennogo naneseniya i uprochneniya pokrytiy modulyaciey elektricheskih parametrov : avtoref. dis. ... dokt. tehn. nauk: 05.02.07, 05.02. 08 / A. M. Kadyrmetov; VGLTA. – Voronezh, 2013. – 32 s.

2. Sosnin, N. A. Plazmennye tehnologii. Rukovodstvo dlya inzhenerov / N. A. Sosnin, S. A. Ermakov, P. A. Topolyanskiy. – Sankt-Peterburg : Izdatel'stvo Politehnicheskogo universiteta, 2008. – 406 s.

3. Rykalin, N. N. Raschety teplovyh processov pri svarke / N. N. Rykalin. – Moskva : Mashgiz, 1951. – 296 s.

4. Mahnenko. V. I. Teplovye processy pri mehanizirovannoy naplavke detaley krugovyh cilindrov / V. I. Mahnenko. – Kiev : Nauk. dumka, 1976. – 159 s.

5. Buhtoyarov, V. N. Tehnologiya vosstanovleniya cilindricheskih poverhnostey valov plazmennym napyleniem s odnovremennym oplavleniem vynosnoy moduliruemoy dugoy (na primere kolenchatogo vala) : avtoref. dis. … kand. tehn. nauk: 05.03.01 / V. N. Buhtoyarov; Voronezhskaya gos. lesotehn. akad. – Voronezh, 2003. – 16 s. EDN: https://elibrary.ru/ZKMDKT

Submit manuscript

To cite

Citations:

Confirmation

Регистрация