Voronezh, Voronezh, Russian Federation
Voronezh, Voronezh, Russian Federation
Russian Federation
UDC 004.89
The problem of recycling polymer composite waste generated in the energy sector (cable insulation, wind turbine blades, heating network elements) requires the development of effective processing methods with the possibility of automated quality control of the final product. The paper considers approaches to integrating the method of cementation of polymer waste into the waste management system of energy enterprises. It is shown that simple replacement of sand with shredded plastic without additional treatment leads to a decrease in strength characteristics. However, the combined use of polymers with mineral additives (brick dust, microsilica) makes it possible to compensate for this drawback. The necessity of automated control of critical parameters is substantiated: particle size distribution of waste, accuracy of component dosing, curing conditions. The structure of an automated quality control system is proposed, including input, operational and output levels.
polymer waste, cement composites, automation of control, quality management, energy systems, composite recycling
1. GOST 10180-2012. Betony. Metody opredeleniya prochnosti po kontrol'nym obrazcam. – Moskva : Standartinform, 2013. – 32 s.
2. Nesvetaev, G. V. Betony s ispol'zovaniem polimernyh othodov / G. V. Nesvetaev, Yu. I. Koryakin // Stroitel'nye materialy. – 2018. – № 3. – S. 42-47.
3. Kalinkin, A. M. Mechanochemical activation of cement mixtures with polymer additives / A. M. Kalinkin, E. V. Kalinkina // Cement and Concrete Research. – 2019. – Vol. 118. – P. 45-53.
4. Calderón, V. Properties of Eco-Cement Blocks Made with Polymer Wastes / V. Calderón, R. Arroyo, C. Alía // Construction and Building Materials. – 2024. – Vol. 412. – P. 134-142. DOI: https://doi.org/10.1007/978-3-031-72955-3_12
5. Shevchenko, V. A. Pererabotka termoreaktivnyh polimernyh kompozitov / V. A. Shevchenko, V. V. Koval'chuk // Plasticheskie massy. – 2020. – № 5. – S. 28-32.
6. Serdyuk, V. S. Utilizaciya othodov vetroenergetiki v stroitel'nyh kompozitah / V. S. Serdyuk, A. V. Kuznecov // Ekologiya i promyshlennost' Rossii. – 2021. – T. 25, № 8. – S. 34-39. DOI: https://doi.org/10.18412/1816-0395-2021-8-34-39; EDN: https://elibrary.ru/FKHMHQ
7. Bazhenov, Yu. M. Tehnologiya betona / Yu.M. Bazhenov. – Moskva : Izdatel'stvo ASV, 2015. – 528 s.
8. Solomatov, V. I. Polimernye kompozity v stroitel'stve / V. I. Solomatov, A. N. Bobryshev. – Moskva : Stroyizdat, 2016. – 240 s.
9. SP 63.13330.2018. Betonnye i zhelezobetonnye konstrukcii. Osnovnye polozheniya. – Moskva : Standartinform, 2019. – 156 s.
10. Storodubceva, T. N. Kompozicionnye materialy na osnove tehnogennogo syr'ya / T. N. Storodubceva. – Voronezh : VGLTU, 2022. – 184 s.
11. Fedosov, S. V. Teplomassoperenos v cementnyh kompozitah s polimernymi napolnitelyami / S. V. Fedosov, V. E. Rumyancev. – Ivanovo : IGASU, 2019. – 196 s.
12. Ponomarev, A. N. Avtomatizaciya kontrolya kachestva stroitel'nyh materialov / A. N. Ponomarev, S. A. Ermakov. – Sankt-Peterburg : Lan', 2021. – 288 s.
