AUTOMATION OF COMPONENT DOSING PROCESS IN THE PRODUCTION OF CONSTRUCTION MIXTURES
Authors:
1.
Voronezh State University of Forestry and Technologies named after G.F. Morozov
Russian Federation
Russian Federation
2.
Voronezh State University of Forestry and Technologies named after G.F. Morozov
Type:
Сonference article
Pages:
from 83
to 90
Published:
23.07.2026
Subject area:
UDC 517.98
Language:
Russian
Keywords:
Automation, dosing, construction mixtures, PID controller, adaptive control
Abstract:
The article deals with the problem of improving the accuracy of component dosing in the production of dry construction mixtures. A mathematical model of the controlled object is proposed, based on which the PID controller parameters are calculated and an adaptive control algorithm is developed that takes into account changes in raw material moisture. The simulation confirmed the effectiveness of the developed solutions. The results can be used in the design of automated control systems for the production of construction mixtures.
The article deals with the problem of improving the accuracy of component dosing in the production of dry construction mixtures. A mathematical model of the controlled object is proposed, based on which the PID controller parameters are calculated and an adaptive control algorithm is developed that takes into account changes in raw material moisture. The simulation confirmed the effectiveness of the developed solutions. The results can be used in the design of automated control systems for the production of construction mixtures.
Keywords:
Automation, dosing, construction mixtures, PID controller, adaptive control
Automation, dosing, construction mixtures, PID controller, adaptive control
1. Petrovskiy, V. S. Avtomatizaciya tehnologicheskih processov i proizvodstv / V. S. Petrovskiy. – Voronezh: VGLTA, 2010. – 432 s.
2. Petrovskiy, V.S. Upravlenie v avtomatizirovannom proizvodstve (lesopromyshlennyy kompleks) / V. S. Petrovskiy. – Voronezh: VGLTA, 2013. – 448 s.
3. Polyakov, S. I. Avtomatika i avtomatizaciya proizvodstvennyh processov: ucheb. posobie / S. I. Polyakov; Fed. agentstvo po obrazovaniyu, GOU VPO «VGLTA». – Voronezh, 2008. – 372 s.
4. Besekerskiy, V. A. Teoriya sistem avtomaticheskogo regulirovaniya / V. A. Bessekerskiy, E. P. Popov. – M.: Nauka, 2005. – 752 s.
5. Men'kov, A. V. Teoreticheskie osnovy avtomatizirovannogo upravleniya / A. V. Men'kov, V. A. Ostreykovskiy. – M.: Oniks, 2005. – 416 s.
