AN OVERVIEW OF THE MAIN METHODS FOR IDENTIFYING DYNAMIC MANAGED SYSTEMS
Authors:
1.
FGBOU VO «Voronezhskiy gosudarstvennyy lesotehnicheskiy universitet imeni G.F. Morozova»
Russian Federation
Russian Federation
2.
Voronezh State University of Forestry and Technologies named after G.F. Morozov
(Department of Computer Science and Information Systems, Professor)
Voronezh, Voronezh, Russian Federation
Voronezh, Voronezh, Russian Federation
Type:
Сonference article
Published:
25.06.2025
Subject area:
681.5
Language:
Russian
Keywords:
automation, classification, modeling, identification, method, tasks, criterion, vector.
Abstract (English):
The development of regulators for automatic control systems (ACS) is traditionally based on modeling controlled objects using mathematical descriptions of their dynamics. Differential and difference equations, as well as transfer and impulse transition functions are used as such descriptions. Over the past decades, the theory of control and identification has formed a wide range of methodological approaches that allow modeling dynamic systems with a high degree of accuracy. This article discusses the main methods of identification of dynamic sys-tems, their classification and application features in modern engineering tasks.
The development of regulators for automatic control systems (ACS) is traditionally based on modeling controlled objects using mathematical descriptions of their dynamics. Differential and difference equations, as well as transfer and impulse transition functions are used as such descriptions. Over the past decades, the theory of control and identification has formed a wide range of methodological approaches that allow modeling dynamic systems with a high degree of accuracy. This article discusses the main methods of identification of dynamic sys-tems, their classification and application features in modern engineering tasks.
Keywords:
automation, classification, modeling, identification, method, tasks, criterion, vector.
automation, classification, modeling, identification, method, tasks, criterion, vector.
1. Tehnicheskaya kibernetika. Teoriya avtomaticheskogo regulirovaniya / pod red. V.V. Solodovnikova. – M.: Mashinostroenie, 2020. – Kn.1: Matematicheskoe opisanie, analiz ustoychivosti i kachestva avtomaticheskogo regulirovaniya. – 768 s.
2. Solodovnikov, V.V. Statisticheskaya dinamika lineynyh sistem avtomaticheskogo upravleniya / V.V. Solodovnikov. – M.: Fizmatgiz, 2019. – 656 s.
3. Andreev, Yu.N. Upravlenie konechnomernymi lineynymi ob'ektami / Yu.N. Andreev. – M.: Nauka, 2021 – 424 s.
4. Kvakernak, H. Lineynye optimal'nye sistemy upravleniya / H. Kvakernak, R. Sivan. – M.: Mir, 2022. – 650 s.
5. Spidi, K. Teoriya upravleniya (identifikaciya i optimal'noe uprav-lenie) / K. Spidi, R. Braun, Dzh. Gudvin. – M.: Mir, 2022. – 248 s.
