INNOVATIVE DEVELOPMENTS AND ADVANCED TECHNOLOGIES OF THE COUNTRY'S FORESTRY COMPLEX : Materials of the All-Russian Scientific and Practical Conference, Voronezh, September 24, 2026 | Воронежский государственный лесотехнический университет имени Г.Ф. Морозова

Home / Conferences / INNOVATIVE DEVELOPMENTS AND ADVANCED TECHNOLOGIES OF THE COUNTRY'S FORESTRY COMPLEX /INNOVATIVE DEVELOPMENTS AND ADVANCED TECHNOLOGIES OF THE COUNTRY'S FORESTRY COMPLEX : Materials of the All-Russian Scientific and Practical Conference, Voronezh, September 24, 2026

Conference title

INNOVATIVE DEVELOPMENTS AND ADVANCED TECHNOLOGIES OF THE COUNTRY'S FORESTRY COMPLEX

Title

INNOVATIVE DEVELOPMENTS AND ADVANCED TECHNOLOGIES OF THE COUNTRY'S FORESTRY COMPLEX : Materials of the All-Russian Scientific and Practical Conference, Voronezh, September 24, 2026

ISBN

978-5-7994-1261-6 (online)

DOI

https://doi.org/10.58168/CouForCom2026

Status

Published

A MODERN TRACTION CONTROL DEVICE FOR OVERCOMING OFF-ROAD CONDITIONS ON FOREST AND FIELD ROADS

pp. 7–12

DOI: https://doi.org/10.58168/CouForCom2026_7-12

ROTATIONAL WORKING AGENTS IN FORESTRY: TECHNOLOGICAL AND DESIGN ASPECTS

pp. 13–18

DOI: https://doi.org/10.58168/CouForCom2026_13-18

ASSESSMENT OF THE STABILITY OF BRUSHWOOD CUTTING QUALITY USING FLEXIBLE WORKING ELEMENTS OF A ROTARY BRUSH CUTTER

pp. 19–22

DOI: https://doi.org/10.58168/CouForCom2026_19-22

INFLUENCE OF THE PARAMETERS OF FLAT COHESIVE UNITS FOR THE INTERVAL BETWEEN THEM IN A SMALL-SIZED RAFT

pp. 23–29

DOI: https://doi.org/10.58168/CouForCom2026_23-29

FEATURES OF CALCULATING TRACTION PERFORMANCE OF WHEELED VEHICLES WITH HYDROMECHANICAL TRANSMISSION

pp. 30–35

DOI: https://doi.org/10.58168/CouForCom2026_30-35

IMPROVING THE EFFICIENCY OF CHOKERLESS TIMBER SKIDDING USING AN ENERGY RECOVERY DEVICE

pp. 36–42

DOI: https://doi.org/10.58168/CouForCom2026_36-42

ASSESSMENT OF THE IMPACT OF USING A MODULAR CRAWLER ON THE ENERGY EFFICIENCY OF A WHEELED TRACTOR

pp. 43–49

DOI: https://doi.org/10.58168/CouForCom2026_43-49

CORRELATION ANALYSIS OF EXPERIMENTAL DATA ON THE FOREST PLOW OPERATION WITH ADDITIONAL ROLLERS‑RIPPERS FOR SEAM

pp. 50–56

DOI: https://doi.org/10.58168/CouForCom2026_50-56

PROCESSING LOW-QUALITY HARDWOOD INTO CONSTRUCTION MATERIALS

pp. 57–59

DOI: https://doi.org/10.58168/CouForCom2026_57-59

MECHANISMS OF MOISTURE-INDUCED DETERIORATION IN FOREST ROAD STRUCTURES AND PROSPECTS FOR USING MODIFIERS FOR RESOURCE CONSERVATION

pp. 60–65

DOI: https://doi.org/10.58168/CouForCom2026_60-65

A DEVICE FOR CREATING A PULSE SWIRLING JET OF LIQUID TO ENSURE THE REQUIRED QUALITY OF STUMPS DEBARKING

pp. 66–69

DOI: https://doi.org/10.58168/CouForCom2026_66-69

SIMULATION OF UNWANTED VEGETATION REMOVAL EFFORT BY FORESTRY MACHINE MANIPULATORS

pp. 70–77

DOI: https://doi.org/10.58168/CouForCom2026_70-77

REVIEW OF MODERN DESIGNS OF FOREST FIRE-FIGHTING SOIL THROWERS

pp. 78–84

DOI: https://doi.org/10.58168/CouForCom2026_78-84

DEVELOPMENT OF REFINED TIME STANDARDS FOR EXECUTING THE TECHNOLOGICAL PROCESS OF SLOT DRAINAGE

pp. 85–90

DOI: https://doi.org/10.58168/CouForCom2026_85-90

METHODOLOGICAL FOUNDATIONS OF THE FORMATION OF THE TECHNOLOGICAL PROCESS OF LOGGING WITH THE SAVING OF WILDLIFE OBJECTS AND THEIR HABITAT

pp. 91–96

DOI: https://doi.org/10.58168/CouForCom2026_91-96

VERIFICATION OF THE SIMULATION MODEL OF A FELLER-BUNCHER PERFORMANCE UNDER INDUSTRIAL CLEARCUT CONDITIONS

pp. 97–102

DOI: https://doi.org/10.58168/CouForCom2026_97-102

ASSESSMENT OF THE EXPERIENCE OF USING DIGITAL FOREST ANALOGUES BY DOMESTIC AND FOREIGN RESEARCHERS

pp. 103–109

DOI: https://doi.org/10.58168/CouForCom2026_103-109

JUSTIFICATION OF THE TECHNOLOGICAL PARAMETERS OF THE AUGER FEEDER OF THE FOREST FIRE MORTAR

pp. 110–116

DOI: https://doi.org/10.58168/CouForCom2026_110-116

DETERMINATION OF THE TECHNOLOGICAL EQUIPMENT APPLICABLE TO UNMANNED SKIDDER MACHINES

pp. 117–123

DOI: https://doi.org/10.58168/CouForCom2026_117-123

ASSESSMENT OF THE COMPLETENESS OF THE UPROOTING OF TERRITORIES FROM UNWANTED TREE AND SHRUB VEGETATION

pp. 124–129

DOI: https://doi.org/10.58168/CouForCom2026_124-129

MOUNTED EQUIPMENT FOR UAVs FOR REFORESTATION WITH CONTAINERIZED SEEDLINGS

pp. 130–134

DOI: https://doi.org/10.58168/CouForCom2026_130-134

DEVICES FOR GIRDLING TREES DURING TENDING FELLING IN YOUNG STANDS

pp. 135–138

DOI: https://doi.org/10.58168/CouForCom2026_135-138

IMPROVING THE ACCURACY OF SAWING IN STRIP‑LUMBERING

pp. 139–143

DOI: https://doi.org/10.58168/CouForCom2026_139-143

ELEMENTS OF CLASSIFICATION DISTRIBUTION MEANS OF MECHANIZATION OF COLLECTION OF INCOMING RESIDUES

pp. 144–150

DOI: https://doi.org/10.58168/CouForCom2026_144-150

MODELING THE SURFACE OF A RUBBLE FILL IN THE PROCESS OF CRUSHING FELLING RESIDUES

pp. 151–157

DOI: https://doi.org/10.58168/CouForCom2026_151-157

INFLUENCE OF HYDRAULIC CYLINDER LAYOUT ON THE POWER AND FORCE PARAMETERS OF THE BOOM LIFTING MECHANISM OF A FORESTRY MANIPULATOR

pp. 158–163

DOI: https://doi.org/10.58168/CouForCom2026_158-163

FOREST BIOMASS AS A FACTOR IN RENEWABLE ENERGY DEVELOPMENT

pp. 164–170

DOI: https://doi.org/10.58168/CouForCom2026_164-170

COMPARATIVE EVALUATION OF ARBORICIDES IN YOUNG STONE THREAT CLEANING BY THE CHEMICAL METHOD

pp. 171–176

DOI: https://doi.org/10.58168/CouForCom2026_171-176

DEVELOPMENT OF A HYBRID ALGORITHM FOR SEGMENTATION AND QUANTITATIVE ASSESSMENT OF FOREST ROAD DEFECTS UNDER LIMITED VISIBILITY CONDITIONS

pp. 177–181

DOI: https://doi.org/10.58168/CouForCom2026_177-181

DIGITAL DESIGN METHODS FOR HIGH-TECH COMPONENTS VIA TOPOLOGY OPTIMIZATION FOR ADDITIVE MANUFACTURING

pp. 182–188

DOI: https://doi.org/10.58168/CouForCom2026_182-188

RESULTS OF EXPERIMENTAL STUDIES OF THE DYNAMIC LOADING OF A FORESTRY MANIPULATOR DURING EMERGENCY LOAD RELEASE

pp. 189–194

DOI: https://doi.org/10.58168/CouForCom2026_189-194

PROSPECTS AND FEATURES OF THE USE OF UNMANNED WHEELED AND TRACKED VEHICLES IN FORESTRY OPERATIONS

pp. 195–200

DOI: https://doi.org/10.58168/CouForCom2026_195-200

TECHNOLOGICAL PROCESSES AND EQUIPMENT FOR BIODIESEL PRODUCTION: DEVELOPMENT ANALYSIS AND OUTLOOK

pp. 201–208

DOI: https://doi.org/10.58168/CouForCom2026_201-208

POWER CONSUMPTION OF A CATERPILLAR MACHINE WITH RUBBER‑ARMORED TRACKS DURING PIVOT TURNING

pp. 209–214

DOI: https://doi.org/10.58168/CouForCom2026_209-214

DEVELOPMENT OF THE DESIGN LAYOUT OF A MAGNETIC DAMPING DEVICE FOR A FORESTRY MANIPULATOR HYDRAULIC DRIVE

pp. 215–220

DOI: https://doi.org/10.58168/CouForCom2026_215-220

STATISTICAL ASSESSMENT OF THE CLOSENESS OF THE RELATIONSHIP BETWEEN THE PARAMETERS OF A FOREST PLOW AND THE QUALITY INDICATORS OF THE LINEAR MICROELEVATION CREATED BY IT

pp. 221–225

DOI: https://doi.org/10.58168/CouForCom2026_221-225

THEORETICAL STUDY OF THE DYNAMICS OF AN ENERGY SAVING HYDRAULIC DRIVE FOR A CUTTING MACHINE’S BLADES

pp. 226–235

DOI: https://doi.org/10.58168/CouForCom2026_226-235

RESULTS OF OPTIMIZATION OF DESIGN PARAMETERS AND OPERATING MODES OF A CHAIN-CUTTING DEVICE

pp. 236–243

DOI: https://doi.org/10.58168/CouForCom2026_236-243

ON THE SELECTION OF A DESIGN PROTOTYPE FOR AN UNMANNED FORESTRY PLATFORM

pp. 244–249

DOI: https://doi.org/10.58168/CouForCom2026_244-249

GENERAL PROVISIONS OF THE METHODOLOGY FOR MODELING A MOBILE CHIPPINGMACHINE

pp. 250–253

DOI: https://doi.org/10.58168/CouForCom2026_250-253

MODELING THE OPERATING PROCESS OF THE SCREW ROTOR MECHANISM OF A FOREST FIRE EXCAVATION MACHINE IN KOMPAS 3D

pp. 254–259

DOI: https://doi.org/10.58168/CouForCom2026_254-259

Date of formation

12.10.2026

Published

19.10.2026

Quantity of pages

260

This collection includes materials from the All-Russian Scientific and Practical Conference "Innovative Developments and Advanced Technologies in the Country's Forestry Sector." The papers address key issues regarding advanced technologies, modern equipment, and promising modes of transport within the forestry sector, as well as directions for innovative development based on resource and energy conservation. The materials are intended for professionals working in the forestry sector and may also serve as a resource for faculty, postgraduate students, master's students, and undergraduates in their studies.

forestry sector, transport in the forestry sector, resource and energy conservation

Code 630
Name Лесное хозяйство. Лесоводство
Code 629.113
Name (Автомобили. Автомобилестроение)
Code 631.316.44
Name с вращающимися ножами. Ротационные культиваторы
Code 629.11.02/.098
Name (Привод. Оборудование. Оснащение...)
Code 623.437
Name Транспортные средства обслуживания, перевозок и снабжения
Code 629.36
Name Специальные транспортные средства
Code 629.3.03
Name Движители. Силовые (тяговые) установки
Code 631.312.3
Name Пахотные машины и орудия. Плуги с движущимися рабочими органами
Code 674-419.3
Name Слоистая дpевесина, склееная клеящим веществом. Фанеpа и дp.
Code 625.711.84
Name Лесные дороги
Code 621.22
Name Гидравлическая энергия. Гидроэнергетика в целом
Code 674.023
Name Пиление. Резание
Code 625.144.6
Name Машины и механизмы для выполнения отдельных видов путевых работ. Переносные станки для сверления шпал и рельсов, рельсовые захваты, рельсорезные пилы. Механизмы для гнутья, рихтовки, подъемки, строжки и фрезерования рельсов. Механизмы для завинчивания и развинчивания болтов и шурупов, забивки и вытаскивания костылей. Станки для затески шпал
Code 004.94
Name Компьютерное моделирование
Code 004.942
Name Исследование поведения объекта на основе его математической модели
Code 629.735.33
Name Самолеты (только сухопутные)
Code 674.093.6-413.82
Name Распиловка. Продольная распиловка круглого леса
Code 674.059
Name Прочее деревообрабатывающее оборудование
Code 62-91
Name Процессы и т.д. по состоянию
Code 620.97
Name Использование прочих источников энергии. Рекуперация энергии
Code 004.93
Name Распознавание и преобразование образов
Code 621.3
Name Электротехника
Code 621.39
Name Электросвязь. Техника электросвязи
Code 621.866-82
Name с гидравлическим приводом
Code 662.756
Name Животные и растительные масла. Смоляные масла
Code 629.1
Name Техника наземных и водных средств транспорта
Code 676.051.32
Name Оборудование для измельчения до объема, требуемого для обработки

PDF

Executive editor

A. Platonov

Confirmation